1. pin-int

Stucchi® VEP-P Series 806504003 Flat Face Nipple, 1 in Male x 1 in SAE, Steel

  • Part#: 806504003
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

The VEP-P screw flat face coupling series is the Stucchi® solution for hydraulic applications requiring high operating pressures and connection with residual pressure trapped in the circuit. The screw connection system eliminates the premature wear or brinelling typically associated with locking ball connection systems when used in high impulse circuits. The triple valve system allows connection of the coupling safely even in the presence of high internal residual pressure and at the same time eliminates fluid loss during the connection disconnection process.

Stucchi® Flat Face Nipple, VEP-P Series, Nipple Fitting, 1 in Connection Size 1, Male Connection Type 1, 1 in Connection Size 2, SAE Connection Type 2, Male|SAE Connection, Steel, Carbon Steel Material Construction, Zinc-Plated, 1.81 in Hex, 4.47 in L, 7250 psi Maximum Operating Pressure, -20 to 100 deg C Operating

California residents see Prop 65 WARNINGS

Connection Size 1      :      1 in
Connection Size 2      :      1 in
Connection Type 1      :      Male
Connection Type 2      :      SAE
Connection Type      :      Male|SAE
Dimensions      :      4.47 in L
Finish      :      Zinc-Plated
Fitting Type      :      Nipple
Hex Size      :      1.81 in
Material Construction      :      Carbon Steel
Material      :      Steel
Maximum Operating Pressure      :      7250 psi
Operating Temperature      :      -20 to 100 deg C
Series      :      VEP-P Series
  • Connection under residual pressure is allowed in both sides, the internal valve system allows an easy connection and the disconnection is included
  • Flat face is easy-to-clean, reducing the inclusion of contamination inside the hydraulic circuit
  • Minimal fluid loss during disconnection, reducing fluid loss to the environment
  • Minimal air inclusion during connection/disconnection
  • Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
  • Internal pressure release valve system allows an easy connection with high internal residual pressure
  • The modular design allows flexibility with a wide range of configurations
  • High resistance with impulse pressures
  • Safe and simple to use
  • Fire tested and Lloyd certified in accordance with API 16D and the EUB Directive #36
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_10WSF10_BOP_Catalog.pdf
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_200610012_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_800001000_Instruction_Installation_Manual.pdf