1. pin-int

ENERPAC® TW3000EI ETW Electric Torque Wrench, Tool/Kit: Tool, 1 in Drive, Square Drive, 3000 to 600 ft-lb, 230 V

  • Part#: TW3000EI
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

ENERPAC® ETW Electric Torque Wrench, Series: ETW Series, Tool, 1 in Drive, Square Drive, 3000 to 600 ft-lb Torque, 230 V, 50/60 Hz, 4.3 rpm, NEMA 6-15, European SCHUKO Plug

California residents see Prop 65 WARNINGS

Drive Size      :      1 in
Drive Type      :      Square
Frequency Rating      :      50/60 Hz
Plug Type      :      NEMA 6-15, European SCHUKO
Series      :      ETW Series
Speed Rating      :      4.3 rpm
Tool/Kit      :      Tool
Torque Rating      :      3000 to 600 ft-lb
Voltage Rating      :      230 V
  • Single control box may be used to operate multiple wrench model
  • Patented firmware design provides accurate fastening on soft or pre-tightened joints
  • High-speed continuous rotation gets the job done faster
  • Torque and angle functionality allows input of nominal torque value followed by a specific angle of rotation
  • Pass/fail LED indicator on back of tool verifies fastening has been completed according to specified input
  • Controls on back of wrench enable operator to monitor and manage the fastening process without returning to the control box
  • Brightly lit three line LED display on wrench is easy to read in any environment
  • Fastening record can be viewed on-screen and transferred to a computer
  • Each tool is performance tested and shipped complete with a factory calibration certificate
  • Lift points on wrench enable use with positioning handle or lifting device for greater handling safety
  • Control box required to operate wrench, electric torque wrench cannot be used without control box
  • Ground fault detector protects operator in the event of insufficient grounding
  • Without control box
  • linkVideo Link https://youtu.be/rCIG5XAewC8
  • pdfWarranty Information https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_PRAMA06014L_Warranty_Information.pdf