1. pin-int

ENERPAC® Hydraulic Cylinder HCRL10012, Double Acting Cylinder, 111.2 ton Advance Cylinder, 11.81 in Stroke, Steel

  • Part#: HCRL10012
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

High pressure high tonnage hydraulic cylinders deliver the high-quality construction that you expect from ENERPAC®. Their durability ensures your job gets done safely and reliably. Plunger support bearing adds support for eccentric loads (side load). Nitrocarburization surface treatment for improved wear resistance and corrosion protection. Replaceable composite bearings surround the seal providing support for eccentric loads. Low-wear, high pressure seals provide longer service life.

ENERPAC® Hydraulic Cylinder, Series: HCRL, Double Acting Cylinder, 111.2 ton Advance Cylinder, Cylinder Class: 100 ton, Cylinder Effective Area: 21.91 sq-in Advance, 10150 psi Maximum Operating, 11.81 in Stroke, 32.32 in Extended Height, 20.51 in Collapsed Height, 258.81 cu-in Advance Oil, Hydraulic Return, 5.51 in Cylinder Bore Diameter, 7.28 in OD, Solid Plunger, 3.02 in Saddle Diameter, TR120 x 6 Plunger Diameter, Base Mounting, 2 Mounting Holes, M12x1.75 Diameter Mounting Hole, Steel, Nitride

Collapsed Height      :      20.51 in
Cylinder Bore Diameter      :      5.51 in
Cylinder Capacity      :      111.2 ton Advance
Cylinder Class      :      100 ton
Cylinder Effective Area      :      21.91 sq-in Advance
Cylinder Type      :      Double Acting
Extended Height      :      32.32 in
Finish      :      Nitride
Material      :      Steel
Maximum Operating Pressure      :      10150 psi
Mounting Hole Diameter      :      M12x1.75
Mounting Type      :      Base
Number of Mounting Holes      :      2
Oil Capacity      :      258.81 cu-in Advance
Outside Diameter      :      7.28 in
Plunger Diameter      :      TR120 x 6
Plunger Type      :      Solid
Return Type      :      Hydraulic
Saddle Diameter      :      3.02 in
Series      :      HCRL
Stroke      :      11.81 in
  • Hydraulically controlled fast retraction
  • Lock nut provides mechanical load holding for a safe work environment
  • Designed to withstand up to 10% side load of maximum capacity
  • Integrated tilt saddle allows for up to 5 deg of misalignment
  • Hardened surface resists side loading and cyclic wear
  • Weather protected, inside and out
  • Replaceable bearings enclose the plunger external and internally for support
  • Certified lifting eyes, base mounting holes and collar thread as standard
  • Stop ring to prevent plunger blow-out
  • Low friction lock nut, spin easy, save time and effort
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCRL10010_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCRL10010_Instruction_Installation_Manual.pdf
  • pdfWarranty Information https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_100A_088_Warranty_Information.pdf