1. pin-int

ENERPAC® Hydraulic Cylinder HCL1004, Single Acting Cylinder, 113 ton Advance Cylinder, 3.94 in Stroke, Steel

  • Part#: HCL1004
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

High pressure high tonnage hydraulic cylinders deliver the high-quality construction that you expect from ENERPAC®. Their durability ensures your job gets done safely and reliably. Plunger support bearing adds support for eccentric loads (side load). Nitrocarburization surface treatment for improved wear resistance and corrosion protection. Replaceable composite bearings surround the seal providing support for eccentric loads. Low-wear, high pressure seals provide longer service life.

ENERPAC® Hydraulic Cylinder, Series: HCL, Single Acting Cylinder, 113 ton Advance Cylinder, Cylinder Class: 100 ton, Cylinder Effective Area: 22.19 sq-in Advance, 10000 psi Maximum Operating, 3.94 in Stroke, 13.27 in Extended Height, 9.33 in Collapsed Height, 87.35 cu-in Advance Oil, Load Return, 5.31 in Cylinder Bore Diameter, 6.89 in OD, Solid Plunger, 2.8 in Saddle Diameter, TR135 x 6 Plunger Diameter, Base Mounting, 2 Mounting Holes, M12x1.75 Diameter Mounting Hole, Steel, Nitride

Collapsed Height      :      9.33 in
Cylinder Bore Diameter      :      5.31 in
Cylinder Capacity      :      113 ton Advance
Cylinder Class      :      100 ton
Cylinder Effective Area      :      22.19 sq-in Advance
Cylinder Type      :      Single Acting
Extended Height      :      13.27 in
Finish      :      Nitride
Material      :      Steel
Maximum Operating Pressure      :      10000 psi
Mounting Hole Diameter      :      M12x1.75
Mounting Type      :      Base
Number of Mounting Holes      :      2
Oil Capacity      :      87.35 cu-in Advance
Outside Diameter      :      6.89 in
Plunger Diameter      :      TR135 x 6
Plunger Type      :      Solid
Return Type      :      Load
Saddle Diameter      :      2.8 in
Series      :      HCL
Stroke      :      3.94 in
  • Lock nut provides positive and safe mechanical load holding
  • Low friction locking rings spin easy, save time and effort
  • Designed to withstand 10% side load up to 90% of maximum stroke
  • Hardened surface resists side loading and cyclic wear
  • Overflow port as stroke limiter to prevent plunger blow-out
  • Weather protected, inside and out
  • Replaceable bearings enclose the plunger for support throughout the stroke
  • Certified lifting eyes and base mounting holes
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCL10010_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCL10010_Instruction_Installation_Manual.pdf
  • linkVideo Link https://youtu.be/KoH-0y37Yq4
  • pdfWarranty Information https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_100A_088_Warranty_Information.pdf