1. pin-int

Stucchi® APM Series 805204005 Flat Face Nipple, 3/4 in Male x 3/4 in SAE, Steel

  • Part#: 805204005
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

The APM male flat face coupling series is the Stucchi® solution for the manual connection with residual pressure in the circuit. The couplings have a triple valve system double internal pressure release valve and the flat face valve. This system easily allows the connection of couplings with the presence of high internal residual pressure without fluid loss. Based on this main feature, APM couplings are the ideal solution to hydraulic applications where there is the requirement to connect the circuit with internal residual pressure.

Stucchi® Flat Face Nipple, APM Series, Nipple Fitting, 3/4 in Connection Size 1, Male Connection Type 1, 3/4 in Connection Size 2, SAE Connection Type 2, Male|SAE Connection, Steel, Carbon Steel Material Construction, Zinc-Plated, 1.42 in Hex, 3.68 in L, 4785 psi Maximum Operating Pressure, -20 to 100 deg C Operating, 0.96 in OD

Additional Information      :      0.96 in OD
Connection Size 1      :      3/4 in
Connection Size 2      :      3/4 in
Connection Type 1      :      Male
Connection Type 2      :      SAE
Connection Type      :      Male|SAE
Dimensions      :      3.68 in L
Finish      :      Zinc-Plated
Fitting Type      :      Nipple
Hex Size      :      1.42 in
Material Construction      :      Carbon Steel
Material      :      Steel
Maximum Operating Pressure      :      4785 psi
Operating Temperature      :      -20 to 100 deg C
Series      :      APM Series
  • Connection under residual pressure is allowed in one side and the internal valve system allows an easy connection
  • Flat face is easy-to-clean, reducing the inclusion of contamination inside the hydraulic circuit
  • Minimal fluid loss during disconnection, reducing fluid loss to the environment
  • Minimal air inclusion during connection/disconnection
  • Internal pressure release valve system allows manual connection with high internal residual pressure
  • Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
  • Good resistance at impulse pressures
  • Compact slim design
  • Safe and simple to use
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_200610012_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_800001000_Instruction_Installation_Manual.pdf