1. pin-int

ENERPAC® Hydraulic Cylinder HCR10012, Double Acting Cylinder, 113 ton Advance Cylinder, 11.81 in Stroke, Steel

  • Part#: HCR10012
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

High pressure high tonnage hydraulic cylinders deliver the high-quality construction that you expect from ENERPAC®. Their durability ensures your job gets done safely and reliably. Plunger support bearing adds support for eccentric loads (side load). Nitrocarburization surface treatment for improved wear resistance and corrosion protection. Replaceable composite bearings surround the seal providing support for eccentric loads. Low-wear, high pressure seals provide longer service life.

ENERPAC® Hydraulic Cylinder, Series: HCR, Double Acting Cylinder, 113 ton Advance Cylinder, Cylinder Class: 100 ton, Cylinder Effective Area: 22.19 sq-in Advance, 10150 psi Maximum Operating, 11.81 in Stroke, 30.67 in Extended Height, 18.86 in Collapsed Height, 262.05 cu-in Advance Oil, Hydraulic Return, 5.31 in Cylinder Bore Diameter, 6.89 in OD, Solid Plunger, 2.95 in Saddle Diameter, 3.74 in Plunger Diameter, Base Mounting, 2 Mounting Holes, M12x1.75 Diameter Mounting Hole, Steel, Nitride

Collapsed Height      :      18.86 in
Cylinder Bore Diameter      :      5.31 in
Cylinder Capacity      :      113 ton Advance
Cylinder Class      :      100 ton
Cylinder Effective Area      :      22.19 sq-in Advance
Cylinder Type      :      Double Acting
Extended Height      :      30.67 in
Finish      :      Nitride
Material      :      Steel
Maximum Operating Pressure      :      10150 psi
Mounting Hole Diameter      :      M12x1.75
Mounting Type      :      Base
Number of Mounting Holes      :      2
Oil Capacity      :      262.05 cu-in Advance
Outside Diameter      :      6.89 in
Plunger Diameter      :      3.74 in
Plunger Type      :      Solid
Return Type      :      Hydraulic
Saddle Diameter      :      2.95 in
Series      :      HCR
Stroke      :      11.81 in
  • Fast advance and retract
  • 10% side load resistance over full stroke
  • Hardened surface resists side loading and cyclic wear
  • Weather protected, inside and out
  • Upper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke
  • Certified lifting eyes, base mounting holes and collar threads
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCR10010_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_HCG10010_Instruction_Installation_Manual.pdf
  • linkVideo Link https://youtu.be/KoH-0y37Yq4
  • pdfWarranty Information https://assets.unilogcorp.com/267/ITEM/DOC/ENERPAC_100A_088_Warranty_Information.pdf