Power Team® Inflatable Jack, 1.1 ton Lifting, 3.1 in Maximum Lift Height, 116 psi Operating Pressure, Rubber Body, 6 in Overall Length, 6 in Overall Width, 0.87 in Overall Height
| Body Material | : | Rubber |
| Lifting Capacity | : | 1.1 ton |
| Maximum Lift Height | : | 3.1 in |
| Operating Pressure | : | 116 psi |
| Overall Height | : | 0.87 in |
| Overall Length | : | 6 in |
| Overall Width | : | 6 in |
- Highly flexible and lightweight jacks only require an air supply of 8 bar (116 psi) maximum
- Water or non-explosive gas can also be used for inflation
- Un-inflated jacks are less than 30 mm (1.2 in) THK, making lifting tasks in small spaces seem routine
- Constructed of non-conducting, high quality rubber material with multi-layer aramid fiber reinforcement
- Samples of jacks are pressure tested to 20 bar and cycle tested (10,000 inflate/deflate cycles at 8 bar for 10,000 inflate/deflate cycles)
- The controller, shut-off and air hoses are all equipped with an industrial interchange style quick disconnect air coupler
- Female half coupler bodies have a locking collar to help the operator avoid accidentally disconnecting the jack while under load
- The top and bottom surface of the jack has a skid-resistant, interlocking pattern to assist in alignment of two jacks being used together
- Single jack controller with dead man control (part number 350090) can be used individually or in multiples to regulate the number of jacks desired
- Heavy attachment handles are provided on the two largest jacks for attachment of a rope or hook to help in positioning the jack
- Inflation hose system is color-coded (red and blue) for easy recognition when using more than one jack
- The jacks can be used at ambient temperatures of -20 deg C (-4 deg F) to 50 deg C (122 deg F)
Catalog