1. pin-int

Power Team® Hydraulic Cylinder C106C, Single Acting Cylinder, 10 ton Cylinder, 2.24 sq-in Cylinder Effective Area

  • Part#: C106C
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Single acting, spring return high quality, general purpose cylinder used for lifting and pressing. Designed to utilize aluminum bronze bearings to significantly reduce wear. Piston return speed and spring life are bolstered by maximum sized springs. Constructed for durability, using a solid steel cylinder body for integrity. Chrome-plated piston rod resists wear and corrosion adding to the cylinder's life cycle. Intricately customizable through the wide range of accessories available to thread onto piston rod, collar or onto cylinder base.

Power Team® Hydraulic Cylinder, Series: C Series, Single Acting Cylinder, 10 ton Cylinder, Cylinder Effective Area: 2.24 sq-in, 8948 psi Maximum Operating, 6.13 in Stroke, 15.88 in Extended Height, 9-3/4 in Collapsed Height, 13.7 cu-in Oil, Spring Return, 1.69 in Cylinder Bore Diameter, 2-1/4 in OD, 1-1/2 in Plunger Diameter, Base Mounting, 2 Mounting Holes, 5/16-18 Diameter Mounting Hole, Steel

Collapsed Height      :      9-3/4 in
Cylinder Bore Diameter      :      1.69 in
Cylinder Capacity      :      10 ton
Cylinder Effective Area      :      2.24 sq-in
Cylinder Type      :      Single Acting
Extended Height      :      15.88 in
Material      :      Steel
Maximum Operating Pressure      :      8948 psi
Mounting Hole Diameter      :      5/16-18
Mounting Type      :      Base
Number of Mounting Holes      :      2
Oil Capacity      :      13.7 cu-in
Outside Diameter      :      2-1/4 in
Plunger Diameter      :      1-1/2 in
Return Type      :      Spring
Series      :      C Series
Stroke      :      6.13 in
  • Aluminum bronze bearing reduces wear caused by off-center loads
  • Maximum sized springs speed piston return and increase spring life
  • Collar threads are standard on all C Series models, simplifying fixturing applications
  • Removable rubber boots protects collar threads during transport and storage
  • Solid steel cylinder body for durability
  • Chrome-plated piston rod resists wear and corrosion
  • Base mounting holes standard on 5 through 55 ton cylinders and optional on 75 and 100 ton cylinders
  • A 3/8 in NPTF female half coupler is standard