The GRUVLOK® FIG 7042 outlet coupling is designed to join two sections of grooved end pipe and form a reducing outlet connection. The outlet couplings are available for the 1-1/2 in through 6 in IPS or ISO run pipe sizes with the outlet pipe sizes ranging from 1/2 in through 2 in. Assembly of the coupling will create a gap between the pipe ends allowing the space required for the introduction of an outlet connection. The outlet connections are available grooved (Fig 7042G), FPT (Fig 7042F) and MPT (Fig 7042M). The gaskets are available in EPDM and nitrile to suit a wide range of applications. The gasket design is a unique pressure responsive design that provides a higher sealing force as pressure is increased. The outlet gasket seal is reinforced by a steel ring and is mated to a machined housing surface to assure a leak tight outlet seal. Center ribs inside the gasket ease positioning of the pipe during installation and provide additional support to the gasket. The outlet couplings are not recommended for vacuum applications or for use with beveled end pipe. The FIG 7074 cast caps are not recommended for use on run connections. Contact an ANVIL® representative for additional details. FIG 7075 bull plugs must be used on end of line run connections. FIG 7074 cast caps may be used on FIG 7042G outlet connections. Flow into the outlet connection of the FIG 7042 outlet couplings must not exceed 7 ft/s.
GRUVLOK® Outlet Coupling, 7042F Series, Coupling Fitting, 2-1/2 x 1/2 in Outlet Branch, FPT x FIP Branch Connection, Iron, Material Construction: Ductile Iron, Finish: Rust Inhibiting Paint, 500 psi, 6-1/2 in W x 3-1/2 in D, -40 to 150 deg F, Additional Information: Orange Color
California residents see Prop 65 WARNINGS
Additional Information | : | Orange Color |
Branch Connection Type | : | FPT x FIP |
Color | : | Orange |
Connection Size 1 | : | 2-1/2 in |
Connection Size 2 | : | 1/2 in |
Connection Type 1 | : | FPT |
Connection Type 2 | : | Female IPS |
Connection Type | : | FPT|FIP |
Dimensions | : | 6-1/2 in W x 3-1/2 in D |
Finish | : | Rust Inhibiting Paint |
Fitting Type | : | Coupling |
Material Construction | : | Ductile Iron |
Material | : | Iron |
Outlet Branch Size | : | 2-1/2 x 1/2 in |
Pressure Rating | : | 500 psi |
Series | : | 7042F Series |
Temperature Rating | : | -40 to 150 deg F |