ENERPAC® ZE61020MG ZE61020MG | Hose of South Texas, Inc
  1. pin-int

ENERPAC® ZE Series ZE61020MG Hydraulic Pump, 208 to 240 V, 3 ph, 7.5 hp, 1201 cu-in Reservoir

  • Part#: ZE61020MG
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

Introducing the Z-class power pumps from ENERPAC® pumps that run cooler, use less electricity and are easy-to-service. ENERPAC® has used the latest metallurgical, bearing and seal technologies to produce a pump whose features and benefits far surpass the electric pumps that are available today. By reducing the number of moving parts, improving flow dynamics and decreasing friction, Z-class pumps will stay on the job longer, require less energy to operate and when needed, have lower service costs.

ENERPAC® ZE Series Hydraulic Pump, HP Rating: 7.5 hp, 208 to 240 V, Phase: 3 ph, 50/60 Hz Frequency, Maximum Operating Pressure: 10000 psi, Maximum Flow Rate: 200 cu-in/min, 1201 cu-in Reservoir, Usable Oil Capacity: 5 gal, Cylinder Compatibility: Single-Acting, 3-Way, 3-Position Manual, Venturi-Value Valve, Valve Operation: Manual, Pump Control Type: Handbook, 80 dBA Sound Level, 27.9 in Length, 19.7 in Width

Cylinder Compatibility      :      Single-Acting
Frequency Rating      :      50/60 Hz
HP Rating      :      7.5 hp
Length      :      27.9 in
Maximum Flow Rate      :      200 cu-in/min
Maximum Operating Pressure      :      10000 psi
Phase      :      3 ph
Pump Control Type      :      Handbook
Reservoir Capacity      :      1201 cu-in
Series      :      ZE
Sound Level      :      80 dBA
Usable Oil Capacity      :      5 gal
Valve Operation      :      Manual
Valve Type      :      3-Way, 3-Position Manual, Venturi-Value
Voltage Rating      :      208 to 240 V
Width      :      19.7 in
  • Features a high-performance Z-class pump design, higher oil flow and by-pass pressure, works with coolers and requires 18% less energy consumption than similar pumps
  • Fully shielded and fan-cooled industrial electric motors provide longer life and resistance to harsh industrial environments
  • Low-voltage pendant provides, on select models, increased operator safety
  • Multiple valve and tank configurations provide application specific models to suit the most demanding industrial applications
  • Heavy-duty molded electrical enclosure protects electronics, power supplies and LCD display readout in harsh industrial environments
  • LCD display reading provides a number of diagnostic and reading capabilities never before offered in an industrial pump (included on models with electric valve, optional on other models)
  • IP54 rating which means superb protection against dust and water
  • pdfCatalog
  • pdfInstruction/Installation Manual
  • pdfSpecification Sheet
  • pdfWarranty Information